I am trying to load Unixware 7.1.4 on a Dell 2650 Poweredge with a PercRaid 3DC controller. This controller card was purchased and used because there are known problems with the onboard controller and Unixware.
SCO Tech Support had emailed me an HBA driver that they thought would work. It loads the HBA diskette, processes the drivers and when I press F10 to continue the installation, I get a red box stating " No Root Disk Found". I have emailed them back indicating that it did not work and am awaiting a return email.
On POST the controller does find the drives and the logical volumes.
Has anyone been successful loading a Percraid 3DC Driver on a Unixware server? Any tips would be appreciated.
Thanks.
SCO Tech Support had emailed me an HBA driver that they thought would work. It loads the HBA diskette, processes the drivers and when I press F10 to continue the installation, I get a red box stating " No Root Disk Found". I have emailed them back indicating that it did not work and am awaiting a return email.
On POST the controller does find the drives and the logical volumes.
Has anyone been successful loading a Percraid 3DC Driver on a Unixware server? Any tips would be appreciated.
Thanks.