Universale Trunk Card, Programming

[Tallguy61380]

Hi,
I was looking for assistance in configuring a Universale Trunk Card to assign an analog line directly to an extension, I got a step by step and it didnt work at all. Many of the codes/items displayed didnt exist on our system, its an M1-Option 11C Rel 23.1, can anyone send over the coding in order to of course first enable the universale trunk card and associated line (pair 1) and then to assign it as a dedicated line to an extension, (rings only on one ext and only can be called out on from one ext) and if possible make that analog line from the trunk "default" instead of IC dialtone.

Thanks.

 

[GHTROUT]

The feature you are looking for is called "Private Line Service".

You need to create a LD16 Trunk Route with PRIV=YES (try to make the Route Number = 31), then create a LD14 Trunk in that route. Then add the PRDN as KEY xx PVR nnnn

Start with the Features and Services Books - the procedure is listed in the book covering features starting with "P"

GHTROUT.com | FAQs | Recent Replies

 

[johnpoole]

that works great, i have one on my phone.. and i do not need to dial 9 to use that line... if you want just inbound then the route is auto yes and the trunk is atdn xxxx to your dn..

john poole
bellsouth business
columbia,sc