Universal Trunk Card NT8D14 1

[Tallguy61380]

Hi,
Just wondering if anyone would have the layout for the 25 pair cable from an NT8D14. Thanks

 

[trvlr1]

THe punch down should be done the same as any digital or analog cards. There is only 8 ports though, so the used pairs are 0,2,4,6,8 etc and count as 0,1,2,3,4 etc respectively when programming. Is this what you are looking for?

 

[strmwalker]

you have seven ports 0 thru 7 0=w/bl 1=w/grn 2 w/slt 3=r/or
4=r/brn 5=bk/bl 6=bk/grn 7=bk/slt

no problems only solutions

strmwalker

 

[Tallguy61380]

Thanks guys, thats exactly what I was looking for

Another part I forgot to ask was, can I designate say CO Port 0 external phone number 905-555-1234 to only ring on one extension such as 1234 and port 1 905-555-5678 to ring on extension 5678 only?

If so, is this done through the LD 20 or what command/LD would be used?

Thanks again.

 

[johnpoole]

1st, build a rdb in ld 16, (prt in 21) then build the trunk in ld 14 (prt in 20).. in the rdb if you answer auto yes you will get a atdn on the trunk... enter the station you want it to ring on.... another trick build it as a pvr and you do not have to dial 9 on that line.. and no one but you can access that trunk

TYPE RDB
CUST 00
ROUT 62
DES  PVR
TKTP COT
NPID_TBL_NUM   0
PRIV YES
SAT  NO
IDEF NET
RCLS EXT
VTRK NO
DTRK NO
ISDN NO
PTYP ACO
AUTO NO
ICOG IAO
RANX NO
TRMB NO
STEP
CPP  NO
TARG
CLEN 1
BILN NO
OABS
TIMR ICF  512
     OGF  512
     EOD  13952
     DSI  34944
     NRD  10112
     DDL  70
     OOD  3
     ODT  4096
     RGV  640
     FLH  510
     GRD  896
     SFB  3
     CRD  512
     IENB  5
     TFD  0
     LEXT  100
     VGD  6
SST  3 0
NEDC ETH
FEDC ORG
CPDC NO
SPCT IMM
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
RVSD 08 31
ILLR 02 02
DRNG NO
CDR  NO
MUS  YES
MRT  81
MR   NO
RACD NO
MANO NO
EQAR NO
OHQ  NO
OHQT 00
TDET NO
TTBL 0
ATAN NO
OHTD NO
PLEV 2
MCTS NO
ALRM NO
ART  0
SGRP 0
AACR NO

and the trunk

 ES  PVR
TN   088 0 00 01
TYPE COT
CDEN 8D
CUST 0
XTRK XUT
TIMP 600
BIMP 3COM
TRK  ANLG
NCOS 4
RTMB 62 1
PRDN 8962
CMF  NO
SIGL LOP
SUPN NO
AST  NO
IAPG 0
CLS  UNR DTN WTA LPR APN THFD
     P10 NTC
TKID

and then add the key x pvr 8962... you can not dial 8962 internal, it works just like a private line, stand alone.. in my case it is ext 8962 from another pbx.. i just used an anaolg ext as a loop start trunk

john poole
bellsouth business
columbia,sc

 

[Tallguy61380]

Thank you kindly John, greatly appreciated.
Have a great weekend,
B.