Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

UNIT PROGRAM FOR TL11

Status
Not open for further replies.

zagali

Technical User
Jul 5, 2013
24
0
0
US
I NEED TO RESTART TL11 UNIT PROGRAM IN TSW SP8
REGARDS
 
Hi,
why do you need to do that?
Command is,
RFPUI:LIM=x,UNIT=TLP11;

Command is dangerous so you need to confirm with Y;
 
Because it will affect traffic. i.e disconnect established calls.
Ideally you should block all TL11 trunks in the LIM in question and ensure there are no ongoing calls before executing the command.
Alternatively perform the operation outside business hours when traffic is low to reduce the impact on users.
 
You make a very good answer
Health care
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top