UNISTIM

[ramblingrebel]

Been a while since i've done this, maybe too long
dug out an older nortel 1140e to play with
has SIP on it, from some work i did on cs1k
but now want to play with it on my bcm50
followed the second post here

http://www.tek-tips.com/viewthread.cfm?qid=1688940

it gets to my tftp server (3cdaemon) but says can't open file
question is "which file" is it trying to open
my bin file or my cfg file
I did the config file in notepad and saved as a cfg file

(i pulled the bin file referenced here off avaya's site)
DOWNLOAD_MODE FORCED
VERSION 0625C4B
FILENAME 0625C4B.bin
PROTOCOL TFTP
SERVER_IP 172.16.1.103
SECURITY_MODE 0

any hints are appreciated...even if its pointing me somewhere to read
googling it i keep going in circles

thanks in advance
rr

 

[curlycord]

Try Joe's video

________________________________________

Add me to LinkedIN

=----(((((((((()----=

http://www.curlycord.com

Toronto, CAN

 

[ramblingrebel]

thanks curlycord
it was the "adding SIP to the end of 1140e.cfg" file name that was stumping me
(like 1140eSIP.cfg)

i don't recall having to do that before

 

[curlycord]

Nice.

________________________________________

Add me to LinkedIN

=----(((((((((()----=

http://www.curlycord.com

Toronto, CAN

 

[exsmogger]

It's because a phone with SIP firmware is looking for a config file that includes SIP in the name. It doesn't care about being pointed at the Unistim firmware, it's just looking for a file with right name. You would do the reverse to flash a phone from Unistim to SIP

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952