Unified Communications Applications: Cisco Call Manager gateway regist

[aniss123]

Hi, I have problem with registration.. I have 2 box of ISDN , one box is connected to port 0/2/1 and he is successful register with call manager but second box on port 0/2/0 can not register it is allways unregister, in debuging i see this:

mgcp_msg_ack:6065,Updating (*)=172.17.1.95
*Sep 11 11:16:43.851: *:NO-MATCH, 172.17.1.95:2427, 172.17.1.95
*Sep 11 11:16:43.851: BRI/S0/*:NO-MATCH, 172.17.1.95:2427, 172.17.1.95
*Sep 11 11:16:43.851: BRI/S0/SU2/*:NO-MATCH, 172.17.1.95:2427, 172.17.1.95
*Sep 11 11:16:43.851: BRI/S0/SU2/P1/*:NO-MATCH, , 172.17.1.95
*Sep 11 11:16:43.851: BRI/S0/SU2/P1/1:NO-MATCH, 172.17.1.95:2427, 172.17.1.95
*Sep 11 11:16:43.851: BRI/S0/SU2/P1/2:NO-MATCH, 172.17.1.95:2427, 172.17.1.95
*Sep 11 11:16:43.851: BRI/S0/SU2/P0/*:NO-MATCH, , 172.17.1.95
*Sep 11 11:16:43.879: MGCP Packet received from 172.17.1.95:2427--->
AUEP 1136 BRI/S0/SU2/P0/1@xxxx.xxxx.com MGCP 0.1


interface BRI0/2/0
no ip address
isdn switch-type basic-net3
isdn overlap-receiving
isdn point-to-point-setup
isdn incoming-voice voice
isdn skipsend-idverify
isdn bind-l3 ccm-manager service mgcp
isdn static-tei 0
end

interface BRI0/2/1
no ip address
isdn switch-type basic-net3
isdn overlap-receiving
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
isdn static-tei 0
isdn skipsend-idverify

What i need to do to get bouth box register with CCM. tnx

 

[whykap]

If you plug in the unregistered BRI to 0/2/1 does it register? Let's start there.
If it does your config is not correct, either on the router or the call manager.
If it doesn't register open a ticket with your provider as you either have a bad circuit or bad layer 1.