Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Unfamiliar behavior of "setdscp" in IPFW

Status
Not open for further replies.

samiramiss

Programmer
Feb 21, 2016
1
IR
Hi
I use FreeBSD 9.2 and ipfw
IPFW rules are defined as follows.

02000 check-state
02900 skipto 3003 ip from any to any via gbeth1 out
03003 skipto 3005 ip from any to any dscp af11
03004 skipto 3007 ip from any to any
03005 setdscp af12 altq af11-gbeth1-out ip from any to any via gbeth1 out
03006 skipto 3010 ip from any to any
03007 skipto 3009 ip from any to any dscp af12
03008 skipto 3010 ip from any to any
03009 setdscp cs7 altq af12-gbeth1-out ip from any to any via gbeth1 out
65535 allow ip from any to any

And packets with dscp af11 and af12 be sent to the gbeth1 interface.
Af11 packets match with Rule 3003 then change dscp value of then to af12 in rule 3005 .
But this packets re-match with rule 3007 and changes dscp value again in 3009 to cs7.
Thus, at the bottom of all outgoing packets from this interface are dscp cs7.
Why it happens?
I expect this package be sent to the 3010 rule after matchs with rule 3005
Thank you for all of your comments and help
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top