Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Unable to Transfer Calls

Status
Not open for further replies.

rookie13

Technical User
Nov 2, 2006
107
US
If I received a call then transfer it to an outside line, it works fine. If I dial an outside line then try to transfer it to an outside line, it will not work. Is there a cls I can change to make this work?
 
As far as i know, if you make the call you can conference to another party but not transfer but the receiving person can transfer you.
 
It has something to do with supervised trunks and/or trunk to trunk barring. Are your trunks loop start, they don't have supervison.


This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
Make sure that TRNX and EXTT are set to yes in the NET portion of the customer data block in LD 15.
 
that is controlled via the cdb..

john poole
bellsouth business
columbia,sc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top