Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

unable to route from mgt port

Status
Not open for further replies.
Sep 5, 2002
30
after clustering a pair of ISG 1000 we can't get to an individual device as we can't get the mgt port to route. we have a seperate trust interface and see that the mgt port is in the trust vr. the untrust has routing to both interfaces.

If i try an ping an external ip from the trust interface IP I get a response but from the mgt interface I get nothing.

Any ideas
 
Hi,

i think this is normaly. The Mgmt port is a 100 Mbit single port and can not be reach of routing form other zones. You can configure an IP on it to work with NSM or web only.


On our ISG 2000 its the same. Mgmt-Zone (predefined
) is member in Trust-vr too.


grettzz



 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top