Product : Backupexec for Netware Version 8.5<br>OS = Netware 4.01<br>Backup Device (manufacturer) = HP<br> <br>Problem : After taking a backup .. if we delete the catalog & try to restore from the tape.. we are not able to restore.<br>For ex.. if we need to restore data from a cartridge on which the backup was performed about 2-3 months back .. we are not able to restore. Wheras the recent 2-3 days (backed up cartridges) can be restored without any problem.<br> <br>Thanks for your assistance.<br> <br>Regards<br>Kiran<br>
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Unable to restore without catalog. 1
- Thread starter 5513183
- Start date
-
1
- #2
What you need to do it re-catalog that tape. Go to your <b>Job Manager</b> screen (no job should be running). Next press <i>Enter</i> while on the <b>Session Status</b> screen (as opposed to the <b>Message</b> screen). This will take you to the <b>Utilities Menu</b>. On this menu is the <b>Catalog Tape</b> option. Put your tape in the drive and select this option. Just follow the on-screen prompts.<br><br> Hope this helps.<br> <p>James P. Cottingham<br><a href=mailto: > </a><br><a href= Veneer Co., Inc.</a><br>All opinions are mine alone and do not necessarily reflect those of my employer.
- Status
Similar threads
- Locked
- Question