Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Unable to ping 1941 router gig 0/1 interface

Status
Not open for further replies.

beckman68

Technical User
Jul 31, 2002
186
US
I am having a wierd problem, I am unable to ping the router. I have a very basic config, I setup the interface with an IP on the network. I have it plugged into a switch which is fine. The network is fine, just added this router. I have the same config on this router as I did on another router and it works fine in it's network which is an almost exact duplicate setup. Default IP route is setup as 0.0.0.0 0.0.0.0 10.10.10.1 which is the gateway. The interface is showing UP/UP. I've also tried moving it to a port on the switch that is used by another device, I've moved it to the other gig0/0 and configured that same way, still nothing. Any suggestions?
 
More information please. Post topology and sanitized config for devices.

Can router even ping itself? Check speed/duplex mismatch?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top