Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

unable to Open device

Status
Not open for further replies.

angelo990

Technical User
Mar 6, 2002
55
US
Once again,

Succesfully installed FW-1 on W2k Svr & connected via
GUI. Created FW object & network as well. Then when
installing the 1st rule, I get an error:
unable to open "Device\FW-1" failed to get interface
list.

Thanks for your help!
 
when you created the FW object did you go to the topoligy tab and "Get" the interface information?
 
Yes, I did that since I have SNMP running on the w2k node. however, it failed to get info from FW.

I was able to get the hostname of FW as well as the SNMP section but not the interfaces names and Ips.

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top