I have set up a 4 computer network, each connecting to a 16 port switch. The DC is connected into port 1. When you connect either computer to the switch, the computer says 'Connected at 10Mb/s'. However, neither one of the computers can detect the other, or the DC. I know its set up right, because it all worked fine untill i moved the systems about, and connected it all back up, pleas help.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Unable to locate the DC
- Thread starter slice16
- Start date
open a command prompt on one of your workstations (start, run, cmd), type ipconfig /all
-or- in windows 98, start, run, winipcfg
see if you're actually getting an ip address from the server or router. It's the best place to start.
Are you able to get on the internet?
~ K.I.S.S - Don't make it any more complex than it has to be ~
-or- in windows 98, start, run, winipcfg
see if you're actually getting an ip address from the server or router. It's the best place to start.
Are you able to get on the internet?
~ K.I.S.S - Don't make it any more complex than it has to be ~
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question