Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Unable to connect to remote machine.. unable to initialize remote agen

Status
Not open for further replies.

alpinetech

Technical User
Mar 16, 2006
30
CA
hi. i am running into some errors when backing up here is the log info

Drive and media information from media mount: 6/25/2007 7:00:12 PM
Drive Name: MaxtorDisks
Media Label: B2D000007
Media GUID: {041d0231-b5be-4e1c-b99d-b135f2ddbe02}
Overwrite Protected Until: 7/15/2007 7:00:11 PM
Appendable Until: 7/1/2007 7:00:11 PM
Targeted Media Set Name: Full
-----------------------------------
Media operation - overwrite.
Software compression enabled.
WARNING: The option 'Verify after backup completes' was not selected.
Performing a verify operation to make sure that media can be read after the backup has completed is recommended.
--------------------------------------------
Job ended: Monday, June 25, 2007 at 11:44:23 PM
Completed status: Failed
Final error: 0xe000fe36 - Corrupt data encountered. See the job log for details.
Final error category: Resource Errors

Click an error below to locate it in the job log

Backup- L-SUPERThe Media Server was unable to connect to Remote Machine L-SUPER.
The Media Server will fall back on the local agent to try and complete the operation.
Unable to initialize Remote Agent

Backup- KLC-LSR-01The Media Server was unable to connect to Remote Machine KLC-LSR-01.
The Media Server will fall back on the local agent to try and complete the operation.
Unable to initialize Remote Agent

Backup- L-OPTOThe Media Server was unable to connect to Remote Machine L-OPTO.
The Media Server will fall back on the local agent to try and complete the operation.
Unable to initialize Remote Agent

Backup- KLC-WKS-059The Media Server was unable to connect to Remote Machine KLC-WKS-059.
The Media Server will fall back on the local agent to try and complete the operation.
Unable to initialize Remote Agent

Backup- KLC-WKS-058The Media Server was unable to connect to Remote Machine KLC-WKS-058.
The Media Server will fall back on the local agent to try and complete the operation.
Unable to initialize Remote Agent

Backup- KLC-WKS-060The Media Server was unable to connect to Remote Machine KLC-WKS-060.
The Media Server will fall back on the local agent to try and complete the operation.
Unable to initialize Remote Agent
--------------------------------------

Click an exception below to locate it in the job log
Backup- \\KLC-DC-01\E: New VolumeWARNING: "\\KLC-DC-01\E:\DataRoot\Homes\KevinN\archive.pst" is a corrupt file.
This file cannot verify.
WARNING: "\\KLC-DC-01\E:\DataRoot\Homes\KevinN\Kevinn.pst" is a corrupt file.
This file cannot verify.

 
ok.. if anyone gets this error. then the solution is this.
It usually isn't necessary to install remote agents on windows xp machines, but if for some reason you do have windows xp on remote pc's then remote agent software needs to be installed. on the backup server locate the rant32 folder, which is in the symantec or veritas folder. copy folder to local machine. from the command prompt goto rant32 and type setupaa.cmd
And thats it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top