Unable to connect remotely to SBS2K3 Server

[Pictman]

I have set up a server with two network cards - one for Broadband & one for the LAN. Everything works fine except I cannot establish a remote connection. Users on the Lan get broadband OK and I can ping the server from outside. I have a static ip address and have been trying to make contact using '**.**.**.***/remote'.

I've pasted the output from ipconfig/all below:

Windows IP Configuration

Host Name . . . . . . . . . . . . : ****
Primary Dns Suffix . . . . . . . : ***********.local

Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes
DNS Suffix Search List. . . . . . : ***********.local

Ethernet adapter Server Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Dual Port Server Adapter
Physical Address. . . . . . . . . : **-**-**-**-**-CC
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.110
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.1.110
Primary WINS Server . . . . . . . : 192.168.1.110

Ethernet adapter Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Dual Port Server Adapter #2
Physical Address. . . . . . . . . : **-**-**-**-**-CD
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.110
NetBIOS over Tcpip. . . . . . . . : Disabled

Does anyone have any ideas?

Thanks for reading this.

 

[markdmac]

Open port 4125 on your router/firewall. That is the port used by /remote.

I hope you find this post helpful.

Regards,

Mark

Check out my scripting solutions at

http://www.thespidersparlor.com/vbscript

Work SMARTER not HARDER. The Spider's Parlor's Admin Script Pack is a collection of Administrative scripts designed to make IT Administration easier! Save time, get more work done, get the Admin Script Pack.