maybeimaleo
MIS
This is driving me crazy!
I have a PE2950 with a dual port QLE2460 installed. It is connected to a Brocade switch, along with a Pillar SAN & a CX300.
I have the both ports on the 2950 zoned to the Pillar and the CX300.
I have the Navisphere agent and Powerpath (hindsight - not sure if PP is needed) on the 2950.
When open Navisphere web client and login to the CX300 I right click on it, choose Connectivity Status, and see nothing. Clicking on Refresh does nothing. Clicking on New... allows me to fill out all of the fields but Ok never becomes un-greyed.
What am I doing wrong? Why won't the CX300 connect to the PE2950?
I have a PE2950 with a dual port QLE2460 installed. It is connected to a Brocade switch, along with a Pillar SAN & a CX300.
I have the both ports on the 2950 zoned to the Pillar and the CX300.
I have the Navisphere agent and Powerpath (hindsight - not sure if PP is needed) on the 2950.
When open Navisphere web client and login to the CX300 I right click on it, choose Connectivity Status, and see nothing. Clicking on Refresh does nothing. Clicking on New... allows me to fill out all of the fields but Ok never becomes un-greyed.
What am I doing wrong? Why won't the CX300 connect to the PE2950?
