Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Unable to conference CUCM 9.1

Status
Not open for further replies.

jaja2468

Technical User
Mar 14, 2007
38
US
The ability to conference has recently stopped working. Pressing the conf key on an active call draws dialtone and places a call to the next party, but pressing conf key again drops the first caller instead of joining the parties.

There are 4 conference bridges assigned, 2 IOS Enhanced CFB and 2 other CFB's that I'm not sure what they are considered, but all 4 are registered to the same server. I have reset/restarted each CFB. I have also verified the 2 IOS Enhanced CFB's as active in their respective gateways. Results did not change.

Not really sure where to go from here or where to look for answers. Any guidance would be appreciated.
 
Did anything change on your regions setup. Make sure the codecs you are using to get there are the same as the codec you have setting up the conference.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top