unable to boot router

[frenzeus1881]

Hi there, does anyone know what is the problem of the following msg?
When a change of confreg to 0x2142 to do a password recovery, the router froze. When rebooted, it shows the following characters on the hyper term.

bòõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõüõ
õõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõõþýT#š ] CCCCCCCCCCCCCCCCòCCCCCòCCCôòòCCCCCòùCC
CCòCùCCCôCCCCCòCò1ùõõõõõõõõõ

It's not even booting into rommon. Hardware prolem? It's a used router, no warranty.

 

[eurobadger]

Hi

If it was booting it look like you may have mistyped the confreg value you wanted, and have corrupted the console port configuration. It is probably that the speed has been changed. Try running your hyperterminal at other baud rates, parity or character lenght values.

EB