I made the following changes:
GATEWAY=10.10.10.2
IMAGE=asa804-23-k8.bin
I successfully tftp the image and booted the asa. I did a write mem and reload and it boots back to rommon mode.
So I then, erased disk0: and tried again with same results
I then download a different image from cisco.com and get the same results.
Cisco Security Appliance admin loader (3.0) #0: Thu Aug 7 20:59:50 MDT 2008
Loading...
mount: mounting /dev/hda1 on /mnt/disk0 failed
mount: mounting /dev/hda1 on /mnt/disk0 failed
Processor memory 177995776, Reserved memory: 20971520 (DSOs: 0 + kernel: 2097152
0)
Guest RAM start: 0xd4000080
Guest RAM end: 0xdd400000
Guest RAM brk: 0xd4001000
IO memory 51224576 bytes
IO memory start: 0xd0bff000
IO memory end: 0xd3cd9000
Total SSMs found: 0
Total NICs found: 7
mcwa i82557 Ethernet at irq 11 MAC: 001b.d554.5129
mcwa i82557 Ethernet at irq 5 MAC: 0000.0001.0001
i82546GB rev03 Ethernet @ irq09 dev 3 index 00 MAC: 001b.d554.512a
i82546GB rev03 Ethernet @ irq09 dev 3 index 01 MAC: 001b.d554.512b
i82546GB rev03 Ethernet @ irq09 dev 2 index 02 MAC: 001b.d554.512c
i82546GB rev03 Ethernet @ irq09 dev 2 index 03 MAC: 001b.d554.512d
i82547GI rev00 Gigabit Ethernet @ irq11 dev 1 index 05 MAC: 0000.0001.0002
INFO: Unable to read firewall mode from flash
Writing default firewall mode (single) to flash
Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
This activation key is not valid, use default settings only
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
Cisco Adaptive Security Appliance Software Version 8.0(4)
****************************** Warning *******************************
This product contains cryptographic features and is
subject to United States and local country laws
governing, import, export, transfer, and use.
Delivery of Cisco cryptographic products does not
imply third-party authority to import, export,
distribute, or use encryption. Importers, exporters,
distributors and users are responsible for compliance
with U.S. and local country laws. By using this
product you agree to comply with applicable laws and
regulations. If you are unable to comply with U.S.
and local laws, return the enclosed items immediately.
A summary of U.S. laws governing Cisco cryptographic
products may be found at:
If you require further assistance please contact us by
sending email to export@cisco.com.
******************************* Warning *******************************
Copyright (c) 1996-2008 by Cisco Systems, Inc.
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Insufficient flash space available for this request:
Size info: request:32 free:0 delta:32
open or write(ffsdev/2/write/32) failed
Could not initialize system files in flash.
Type help or '?' for a list of available commands.
ciscoasa> n enable
Password:
ciscoasa# sho
ciscoasa# show FLA fla
ciscoasa# show flash:
--#-- --length-- -----date/time------ path
1374 0 Mar 30 2009 10:27:14 crypto_archive
1368 0 Mar 30 2009 10:27:01 log
0 bytes total (0 bytes free)
ciscoasa#