Unable to access BCM400 from desktop.

[RasFada]

I do admin on our Nortel BCM400 from a desktop on our LAN network. The BCM is set up a Workgroup to a Win2003 server. After making changes to CDR parameters, I logged out the system and was unable to communicate with it since. I'm getting that IE screen saying "Page Cannot Be Displayed".

What should I do to established communications with the machine?

Bryan
IT Specialist

 

[skippy440]

What changes did you make to the CDR? Have you
tried to access the BCM directly using a cross-
over cable?

If you still can't get in via that route, then
use 'Telnet' to access the machine and see if the
IP address has changed.


There are only 2 seasons in Canada, Golf and Snowmobile season.

 

[RasFada]

Basically the only change I made under Call Detail Recording was change format from SL-1 to Norstar.