Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ultra ups Died

Status
Not open for further replies.

conntaxman

Programmer
Aug 7, 2003
55
US
my Ultra 1000AP UPS just stopped working,Push power button Nothing happens,checked all the fuses,and the 120vac coming in and its their,reset is working,Looked at large pc board and nothing looks fried,checked batteries and their down to about 8vdc,Its been off /unpluged about 8 months now, bought a new one.But would like to fix this one.
are the main boards for sale? Thats what i think it is.
tks
John
 
I had this happen about two years ago. I contacted APC support to trouble shoot my symptoms (warning beeper wouldn't turn off). After 2 or 3 emails back and forth, the conclusion was that the unit was not repairable.

HOWEVER they DID have a good sale on a new unit!!! <grin>

Seriously, I have a couple of dead units out back. I just pull the batteries for other uses. Unless it is a high power commercial unit - it's not worth the time or money. Contact the manufacturer to see if a board is even available.
 
Repairing isn't really a great idea and I don't see any parts availability from a QUICK search. Personally I'd stick with a more mainstream brand like APC, TrippLite, CyberPower and then you would have better parts availability. Use the TradeUPS program to get some (marginal) value out of the old unit when you have an APC.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top