Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ultra 60 workstation getting FAST DATA MMU MISS at boot

Status
Not open for further replies.

Hawki

Programmer
Oct 16, 1999
63
US
Ultra 60 workstation getting FAST DATA MMU MISS at boot
Can't boot to hard drive.

{0} boot

Probe-scsi shows the hard drive and DVD drive

Need to set the Boot Prom so it can boot from the hard drive. Got the Fast error after trying to set hard drive as default boot device.

How do I list the one scsi drive on the system so I can set it to boot.
"printenv boot-device" shows boot-device = /pci@if,4000/scsi@3/disk@0,0


After reset:

Drive not ready
Can't read disk label
Can't open disk label package

Can't open boot device

{0}

Need hard drive information so I can enter it using "setenv boot-device device[n]
 
use the show-devs command, it will list the options for drive paths.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top