Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ugh!! Partner Edition!! 2

Status
Not open for further replies.

thephonelady

Vendor
Feb 27, 2004
479
US
Hello all. System speed dials on Basic Partner Edition do not work sporadically. I monitored what is being sent out to the LEC and see the 1+10 but it seems like the 1 is being lost at times. I get a call can't be completed as dialed recording. If I manually dial the number it goes through 100% of the time. I added an additional 1 in the speed dial number and that seemed to do the trick while I was there testing. Next day, not working. It seems like there is a lag between dialing and what gets sent out.
Anyone ever seen this problem?
Thanks in advance. [hairpull]
 
Try putting a pause before the number. P-1-800-555-1212

Putting an extra 1 in front would make it an invalid number 1-1-800-555-1212
 
Thanks TTT. Can the system speed dials be programmed from x10 or only manager?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top