Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
UDS1-BD minor alarm
- Thread starter yetro
- Start date
if you are looking at the error log and your error is 1 then you are getting a SAKI sanity test problem. If you test the board and it fails 53 then you confirmed it. Now you can take the board out and leave it out for about 30 seconds and reseat and this will prob clear the error. Or you cand busy reset the board and then release.
- Status