Udp

[Rickbro]

Ok gurus help me out here ive got 2 magix both 3.0 using centralized vmail. putting it together in the lab and i can dial across the network (t-1 crossover cable between switches) ring the proper extensions but im not seeing the caller info i.e. extension number of calling ext.
Its built as a pri dont remember having to do anything special to get this to work but memory fading in old age.
It doesnt pass it in either direction.

Rick

 

[Pepperz]

If you set up the T-1 as PRI, it will send the information. If you set the T-1 as regular T-1, it won't.

Pepperz@charter.net

 

[Rickbro]

It is setup as a pri the thought of some of the people ive talked too is that its an issue with release 3.0 but i havnt been able to confirm yet. I will let you all know as soon as i do.

 

[Pepperz]

Under the Extension menu, and display prefrerences, you can select what you want to "see,", but if nothing has been changes from defaults, then you should be seeing something on a PRI setup.

Pepperz@charter.net

 

[GoKings]

Per Pepperz last input...by default, the side defined as PBX will see the info and the site defined as Network will see nothing. It is not a problem with 3.0 because I have networked 3.0's.

 

[Rickbro]

Just thought i would let you all know this was a rel 3.0 issue. I talked to tier 3 avaya yesterday and they confirmed that tier 4 is currently working on the problem.
I did upgrade actually downgrade tp rls 2.2 reprogramed and all is as it should be.

rls 3.0 ver 7