UDP won't work over new PRI

[Blueline]

I have 2 R7 Legends with a point to point T1 that's been working fine.
In our main Legend, we just converted the main in/out T1 to PRI.
Now the remote Legend cannot make any outbound calls over that new PRI. It's used for all the in/out traffic of both Legends.
Inbound DID routes to the remote fine.
UDP works fine still, haven't touched those DS1 cards.
Any thoughts ?

 

[merlinman]

My thoughts are that there are several dozen steps to program a PRI.

Any one of which, done incorrectly can cause problems.

I suppose you could do a "PRINT" of your PRI programming and POST it here and someone could look it over to see if there is something you missed.

http://home.comcast.net/~merlinman

 

[Blueline]

Here's a copy of the PRI print for anyone who can look at it:

There's an existing pt-pt T1 ( non-PRI ) for UDP to another Legend within a very short distance that cannot access this PRI via ARS. Interestingly, I can use Remote Access and pool Dial Out Codes to get outbound calls from the remote Legend through the PRI.

A PRI INFORMATION



A Slot 14 Switch: 5ESS

A System: By line

A BchnlGrp #: Slot: TestTelNum: NtwkServ: Incoming Routing:
A 1 14 CallbyCall By Dial Plan

A Channel ID: 23 22 21 20 19 18 17 16 15 14
A 13 12 11 10 9 8 7 6 5 4
A 3 2 1

A Line PhoneNumber NumberToSend
A 837
A 838
A 839
A 840
A 841
A 842
A 843
A 844
A 845
A 846
A 847
A 848
A 849
A 850
A 851
A 852
A 853
A 854
A 855
A 856
A 857
A 858
A 859

A Network Selection Table

A Entry Number: 0 1 2 3
A Pattern to Match: 101**** 10***

A Special Service Table

A Entry Number: 0 1 2 3 4 5 6 7
A Pattern to Match: 011 010 01 00 0 1
A Operator: none OP OP OP/P OP none none none
A Type of Number: I I I N N N N N
A Digits to Delete: 0 0 0 0 0 0 0 0

A Call-By-Call Service Table

A Entry Number: 0 1 2 3 4
A Pattern 0: 0
A Pattern 1: 1
A PRI INFORMATION


A Pattern 2: 2
A Pattern 3: 3
A Pattern 4: 4
A Pattern 5: 5
A Pattern 6: 6
A Pattern 7: 7
A Pattern 8: 8
A Pattern 9: 9
A Call Type: BOTH BOTH BOTH BOTH BOTH
A NtwkServ: No Service No Service No Service No Service No Service
A DeleteDigits: 0 0 0 0 0

A Entry Number: 5 6 7 8 9
A Call Type: BOTH BOTH BOTH BOTH BOTH
A NtwkServ: No Service No Service No Service No Service No Service
A DeleteDigits: 0 0 0 0 0

A Dial Plan Routing Table

A Entry Number: 0 1 2 3
A NtwkServ: Any service
A Expected Digits: 0 0 0 0
A Pattern to Match:
A Digits to Delete: 0 0 0 0
A Digits to Add:

A Entry Number: 4 5 6 7
A NtwkServ:
A Expected Digits: 0 0 0 0
A Pattern to Match:
A Digits to Delete: 0 0 0 0
A Digits to Add:

A Entry Number: 8 9 10 11
A NtwkServ:
A Expected Digits: 0 0 0 0
A Pattern to Match:
A Digits to Delete: 0 0 0 0
A Digits to Add:

A Entry Number: 12 13 14 15
A NtwkServ:
A Expected Digits: 0 0 0 0
A Pattern to Match:
A Digits to Delete: 0 0 0 0
A Digits to Add: