UDP Routing

[Notsetinstone]

I have a strange problem. why in my udp route when calling 1144 would the Magix strip the 1 and just send 144. For testing I have added 888888 to the route. When I call 1144 to I am sending 144888888 not 8888881144. I cant figure out why this is happening.

Both the ARS (9) is using pool 891 and my udp route is using 891. Does anyone have any Ideas?

 

[merlinman]

Print your PRI Programming, and post it here for more help.

http://home.comcast.net/~merlinman

 

[Notsetinstone]

ok

 

[Notsetinstone]

Sorry this took so long I appreciate the help.
A PRI INFORMATION



A Slot 6 Switch: 5ESS

A System: By extension Base number:

A BchnlGrp #: Slot: TestTelNum: NtwkServ: Incoming Routing:
A 1 6 CallbyCall By Dial Plan

A Channel ID: 23 22 21 20 19 18 17 16 15 14
A 13 12 11 10 9 8 7 6 5 4
A 3 2 1

A Line PhoneNumber NumberToSend
A 821
A 822
A 823
A 824
A 825
A 826
A 827
A 828
A 829
A 830
A 831
A 832
A 833
A 834
A 835
A 836
A 837
A 838
A 839
A 840
A 841
A 842
A 843

A Network Selection Table

A Entry Number: 0 1 2 3
A Pattern to Match: 101**** 10***

A Special Service Table

A Entry Number: 0 1 2 3 4 5 6 7
A Pattern to Match: 011 010 01 00 0
A Operator: none OP OP OP/P OP none none none
A Type of Number: I I I N N N N N
A Digits to Delete: 3 3 2 2 1 0 0 0

A Call-By-Call Service Table

A Entry Number: 0 1 2 3 4
A Pattern 0: 0
A Pattern 1: 1
A PRI INFORMATION


A Pattern 2: 2
A Pattern 3: 3
A Pattern 4: 4
A Pattern 5: 5
A Pattern 6: 6
A Pattern 7: 7
A Pattern 8: 8
A Pattern 9: 9
A Call Type: BOTH BOTH BOTH BOTH BOTH
A NtwkServ: No Service
A DeleteDigits: 0 0 0 0 0

A Entry Number: 5 6 7 8 9
A Call Type: BOTH BOTH BOTH BOTH BOTH
A NtwkServ:
A DeleteDigits: 0 0 0 0 0

A Dial Plan Routing Table

A Entry Number: 0 1 2 3
A NtwkServ: Any service Any service Any service
A Expected Digits: 4 4 4 4
A Pattern to Match: 0795 0796 0798
A Digits to Delete: 0 4 4 4
A Digits to Add: 299 299 4401

A Entry Number: 4 5 6 7
A NtwkServ:
A Expected Digits: 4 4 4 0
A Pattern to Match: 0703 7933 0701
A Digits to Delete: 4 4 4 0
A Digits to Add: 4401 4401 4401

A Entry Number: 8 9 10 11
A NtwkServ:
A Expected Digits: 0 0 0 0
A Pattern to Match:
A Digits to Delete: 0 0 0 0
A Digits to Add:

A Entry Number: 12 13 14 15
A NtwkServ:
A Expected Digits: 0 0 0 0
A Pattern to Match:
A Digits to Delete: 0 0 0 0
A Digits to Add:

 

[jinxs]

As well print your UDP. There is an option to delete and add digits on the UDP table. First I would check you UDP dial plan by going to system renumber, non local UDP. Then press inspect. This will show your udp dial plan. From the Print you should be able to see this as well, which UDP route it is taking, and if you are deleting digits under the route. We delete digits all the time for Centrailzed Voicemail. Hope this Helps.

A.J. Wiesner
AT&D Communications

 

[merlinman]

Yes, I asked for the wrong thing when I typed PRI.

Let's see what your UDP looks like.

http://home.comcast.net/~merlinman