UDP Question

[tiaka]

I have 2 switches and need to reach a hunt group 98 on Switch 2 by dialing 7560 the assigned number hunt group 98.

Can I program UDP using the other switch to reach this number? I have re pointed extensions using UDP so users can keep there numbers when physically moving across buildings.

How do I do that for a Hunt group?

I'm following the same method using extensions but getting a waive off

Need to be able to dial into Switch 2 using 7560 from Switch 1 I have a point to point up and running.
Any help

 

[tiaka]

btw I have a G3si v8 need to connect to another G3si
UDP works with Extensions need it to reach 7560 without removing 7560 from Switch 2

 

[wmainc]

What does the UDP in switch 1 show for 7560? Can you do "disp udp 75xx" in switch 1 and post screen shots of the 2 pages that come up?

 

[tiaka]

This is the switch that has the 7560 on it

UNIFORM DIALING PLAN
Ext Codes: 75dd

Ext Code: 7xxx Type:

Ext Code: 75xx Type: Local

dd Type dd Type dd Type dd Type dd Type

5x: 6x: 7x: 8x: 9x:

50: 60: 70: 80: 90:
51: 61: 71: 81: 91:
52: 62: 72: 82: 92:
53: 63: 73: 83: 93:
54: 64: 74: 84: 94:
55: 65: 75: 85: 95:
56: 66: 76: 86: 96:
57: 67: 77: 87: 97:
58: 68: 78: 88: 98:
59: 69: 79: 89: 99:

 

[tiaka]

This is the switch that I would like to dial from over to the switch that had hunt group number 7560.

UNIFORM DIALING PLAN
Ext Codes: 75dd

Ext Code: 7xxx Type:

Ext Code: 75xx Type: UDPCode 202

dd Type dd Type dd Type dd Type dd Type

5x: 6x: 7x: 8x: 9x:

50: 60: 70: 80: 90:
51: 61: 71: 81: 91:
52: 62: 72: 82: 92:
53: 63: 73: 83: 93:
54: 64: 74: 84: 94:
55: 65: 75: 85: 95:
56: 66: 76: 86: 96:
57: 67: 77: 87: 97:
58: 68: 78: 88: 98:
59: 69: 79: 89: 99:

 

[AvayaTier3]

show aar analysis for 2027560 and the route pattern

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting

http://bshtele.com

 

[tiaka]

display aar analysis 2027560 Page 1 of 2
AAR DIGIT ANALYSIS TABLE
Percent Full: 38

Dialed Total Route Call Node ANI
String Min Max Pattern Type Num Reqd
221 7 7 p35 aar n
222 7 7 p36 aar n
223 7 7 p35 aar n
225 7 7 p35 aar n
28 7 7 p10 aar y
29 7 7 p10 aar y
3 7 7 p33 aar n
4 10 10 p33 aar n
610 10 10 p10 aar n
7 7 7 p33 aar n
8 7 7 p33 aar n
8444 7 7 p10 aar y
9 7 7 p33 aar n
n
n

 

[tiaka]

doesn't look like there is a 202 to dial
I have a route patter 23 for the PTP Trunk group do i need to setup a AAR and assign it to the route?

 

[AvayaTier3]

display aar analysis 202

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting

http://bshtele.com

 

[tiaka]

display aar analysis 202 Page 1 of 2
AAR DIGIT ANALYSIS TABLE
Percent Full: 38

Dialed Total Route Call Node ANI
String Min Max Pattern Type Num Reqd
202 7 7 p34 aar 2 n
221 7 7 p35 aar n
222 7 7 p36 aar n
223 7 7 p35 aar n
225 7 7 p35 aar n
28 7 7 p10 aar y
29 7 7 p10 aar y
3 7 7 p33 aar n
4 10 10 p33 aar n
610 10 10 p10 aar n
7 7 7 p33 aar n
8 7 7 p33 aar n
8444 7 7 p10 aar y
9 7 7 p33 aar n

 

[AvayaTier3]

display partition-route-table 34



A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting

http://bshtele.com

 

[tiaka]

display partition-route-table 34
PARTITION ROUTING TABLE

Routing Patterns
Route
Index PGN 1 PGN 2 PGN 3 PGN 4 PGN 5 PGN 6 PGN 7 PGN 8
----- ----- ----- ----- ----- ----- ----- ----- -----
34 100 100 100
35 22 22 22
36 22 100 22
37 23
38
39 20 20 20
40
41 12 41 112
42
43
44
45
46
47
48

 

[AvayaTier3]

display route 100


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting

http://bshtele.com

 

[tiaka]

display route-pattern 100
Pattern Number: 100

Grp. FRL NPA Pfx Hop Toll No. Del Inserted IXC
No. Mrk Lmt List Digits Digits
1: 8 0 3 user
2: user
3: user
4: user
5: user
6: user

BCC VALUE TSC CA-TSC ITC BCIE Service/Feature BAND No. Numbering LAR
0 1 2 3 4 W Request Dgts Format
Subaddress
1: y y y y y n y as-needed bothept none
2: y y y y y n n rest none
3: y y y y y n n rest none
4: y y y y y n n rest none
5: y y y y y n n rest none
6: y y y y y n n rest none