UCX250 ,BCM50 DG ports only 8??

[Atechguyy]

Hey There ,, I have UCX250 r6 0x8 and Bsm50 DG both units have demo license registered ,, system is working bbutt when i try to go above 8 extensions it says only licensed for 8 ,, which i was told the 12 digital stations would be live and if u add another BCM Digital station Mod.they also would be live?? Do i still have to tell them to active them , i was told that the license with the gateway was built in ?? Any Tips ??? Thaks

Durham/Kawartha ,Ont.

 

[telcodog]

Brett, the Digital Gateway licensing opens up all the ports on it. You can connect to any of the 76 possible digital ports and the 4 analog station ports. This license has very little to do with the user licenses. Those 8 you quote are good for licensing any 8 users you want. They can be digital sets, IP or analog but the UCX will only allow you to have 8 working, registered devices. As an example, if you wanted to connect 8 digital sets, you could physically connect them to any digital port on your DG and once registered they would all work.

With the DG license, the expansion ports are enabled which allow you to connect up to 2 DSM32 modules and you can connect to any of them....but only 8. If you want more phones working, you have to buy more user licenses, They come as single or bundles of 5, 10, 20 and 50 but you can also get a bundle that takes you from the 8 up to 25.

Give me a call and I will go over the licensing with you. Emetro was pretty light on that subject last week.

 

[Atechguyy]

Okay I will talk with u when we meet up ,, thanks for explaining that part ,,and it was a bit muddy on that part about the BCM50 D.G ports ,they made it sound like the licensing was built into the D.G. purchase . ,, call or email when u can meet up ,,i know a have a few more questions on setup. Have a great day!! Telcodog.

Durham/Kawartha ,Ont.