UCM on System Manager and PBX Registration

[BrokenRecord2]

Maybe I'm missing something here...

How do you register a CS1K on UCM when its on a system manager? I have one connection on the system manager that is a TLAN connection. Do I need to route my ELAN and TLAN networks now? Did I just miss something in the configuration? Thanks in advance!

Jeff

 

[scotthdiv]

Yes - the ELAN needs to be routable. It still needs to be it's own VLAN of course, but you need to be able to get out to the System Manager.

 

[KCFLHRC]

The PBX only has an ELAN, so yes they need to be routable. This has been a requirement since 6.0. Now if you put your System Manager in the ELAN this would not be an issue. Really no reason for System Manager to be in the TLAN.

 

[janaya]

if you are using a cpmgs card, co-res, just create a route. put your ucm IP address and route it over the elan gw. If your elan is routeable as stated above, it will work. i ran into this the first time and it took me a while to figure it out, then i remembered the install stating the default gw will use the tlan gw.

created the route and all worked fine.

John Anaya
Signet6 Network Sciences
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile

http://www.linkedin.com/pub/john-anaya/25/1b9/a9b/Edit