Does anybody else find that when using UCA3.2 on Vapp, all the client run slower than normal. After upgrading from UCA2.0 windows based to MSL based 3.2 on VM, the clients run slowly even if they try to search in the corporate directory, it just runs with some delay of about 3-5 seconds. Any experiences with this will be much appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
UCA 3.2 Vapp
- Thread starter TrunkMan
- Start date
Supernova99
Technical User
I have the same, and it is even worse on UCA 4.0 I recon it takes at least 30 - 40 secs to load
Share what you know - Learn what you don't
Share what you know - Learn what you don't
- Thread starter
- #3
Supernova99
Technical User
As I am connecting using Teleworker mode I have been told this is normal behaviour. It is much quicker when I am in the office but it still takes longer to load than YA did.
30-40 secs is from the the time I launch UCA 4.0 until it has loaded
Corp dir is OK which loads normally.
Share what you know - Learn what you don't
30-40 secs is from the the time I launch UCA 4.0 until it has loaded
Corp dir is OK which loads normally.
Share what you know - Learn what you don't
Mitelpassion
IS-IT--Management
my experience with it has been that it was slow on a number of fronts, especially with the presence (on hook, off hook and ringing stuff)
taking and placing a call will take long for instance when a call came in, the PC speaker will ring but there would be no indication that the call is there. on dialling out, it would take 5 -10 seconds to pop up with the control window
I'm going to install 4.0 to see if it's any better.
taking and placing a call will take long for instance when a call came in, the PC speaker will ring but there would be no indication that the call is there. on dialling out, it would take 5 -10 seconds to pop up with the control window
I'm going to install 4.0 to see if it's any better.
- Thread starter
- #7
there is a bulletin regarding this kind of behavour caused by some virus scanners, reccomendation is to exclude from real time scanning.
I have found this has speeded up several machines but I also find the speed issue does not seem to exist on new laptops with much better specs.
I have found this has speeded up several machines but I also find the speed issue does not seem to exist on new laptops with much better specs.
- Thread starter
- #9
- Status
Similar threads