Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

UC360 Teleworker Mode 1

Status
Not open for further replies.

mandinga925

Vendor
Jul 31, 2019
2
US
I have a customer that needs to connect a UC360 via MBG / teleworker in one of their remote offices.

Can someone assist on how to get this done?
 
Create your UC360 on the MiVB as normal with a sip password in the user and devices profile.

On the MBG, under 'Service Configuration' and 'SIP Users' click the '+' button to add a new SIP teleworker device.

Under the ICP-Side username and password enter the extension number and SIP PIN created on the MiVB.

Under the Set-side username and password enter a Set-side username - something like 'conf_phone_xxxx' and a proper password - use a password generating site like
Then on the UC360 itself, point it to the public IP address of the teleworker and use the Set-side username and Set-side password to authenticate with the MBG. The MBG will then pass that on to the MiVB using the ICP-Side details you entered.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top