uc360 cant call out on analog trunks

[Tinos]

Hi all.

I have a uc360 which cannot make outgoing calls via analog trunks however it can do so when using ISDN PRI.
On analog trunks it just beeps displaying the dialed number@ip address of mivb. Example 123456@192.168.1.2.
What setting is required on the uc360 or trunks for the call to go through?

 

[jpruder]

Can a deskset make a call to this number on the analog trunk?

 

[Tinos]

Yes both analog and IP extensions can call out the analog trunks.

 

[jpruder]

I would look at the dial plan in the UC360

 

[Tinos]

Please explain more on the dial plan. The uc360 can call on other trunk types.

 

[Valamagules]

Is the Outbound CLI of the UC360 allowed out the PSTN carrier network?

Clever men learns what Wise men shares!

 

[Tinos]

The PSTN carrier for the analog trunks does not use CLI. All extensions use one CLI number for calling out. Not sure if this is what you are asking Valamagules.

 

[Tinos]

Resolved by a system reboot.