UC Mobile client & provisioning

[Layne5]

Hey, did anyone (sucessfully) test UC Mobile client? I can't get the provisioning working (i get "provisioning started" but the provisioning sms is not send).
My mas has both connection to the controller/Internet.

Thnx for your feedback

 

[mitelfang]

Make sure you can access

https://provisioning.emccsoft.com/mitelws/provision.asmx

 

[Layne5]

Hi mitelfang,
Yes, that's working. I'm not sure but i think the major issue is that i'm not receiving any provisioning sms.
I tried to install it manually on a Nokia E51 by sending an sms myself with following message (found this string in the manual):
Click to Install ME client:

http://85.118.15.132/MitelUATProvHa...rovId=feace063-5d99-489b-9e09-6123beea3f07-73

The installation of the Mobile client is done correctly then, BUT it uses the login "1138", a number that's TOTALLY not known and this cannot be changed.

Any ideas?

 

[mitelfang]

i just installed UC client one time,and provisioning is no problem.
but i think the sms including some message such as the number ? server IP address ...
so you must use the SMS provisoned by your owen server.

 

[Layne5]

Hi, i got it working now.
Apparently the number should be in international format but without any zero's.