Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

TZ170 as basic branch office router

Status
Not open for further replies.
Clarksville

Clarksville

IS-IT--Management
Feb 3, 2004
27
US
I have 5 branch offices that will be on private MetroEthernet 10 Mbps WAN. I have several unused TZ170s (unlimited). Wondering if these work as basic IP router.

Would need to turn off NAT, don't need RIP, don't need failover. Would connect to Cisco core router on other side of WAN. Any thoughts?
 
Status
Not open for further replies.

Similar threads

Sparrow4
  • Locked
  • Question
Configure Avaya IPO R11 / VM Pro + Office365 or Exchange for voicemail to email
Replies
2
Views
288
Johnkite
Johnkite
tjbradford
  • Locked
  • Question
ASAX 5508 - basic config - packet loss
Replies
0
Views
83
tjbradford
tjbradford
TheFireman2
  • Locked
  • Question
Help with Watchguard Firebox M200 setup as a TMG 2010 replacement with ASA 5515 as main firewall
Replies
1
Views
110
hairlessupportmonkey
hairlessupportmonkey
intel233
  • Locked
  • Question
ASA5510 - SSL Cert
Replies
0
Views
198
intel233
intel233
brownmab53
  • Locked
  • Question
PIX 525 ASA not allowing DHCP addresses to pass through to router
Replies
0
Views
69
brownmab53
brownmab53

Part and Inventory Search

Sponsor

Back
Top