Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Two-way speaker

Status
Not open for further replies.
themanstan

themanstan

Programmer
Jan 30, 2003
19
US
Is the MISC 8x24 capable of supporting two-way speaker horn
 
Sort by date Sort by votes
What I have done in the past is hook the paging system to the Co lines. You can usually get a valcom unit that supports talk back paging and will do what you want. Richard S. McCranie
CoMatrix Southeast
richm@comatrix.com
 
Upvote 0 Downvote
The page port is one way only. To use a two-way paging system the paging must be connected to a line port on an analog trunk card. Then program an appearance of that line on each set that needs paging access or assign it a line pool by it self and access paging through a pool code.

Rob
 
Upvote 0 Downvote
Bogen also makes a talk back amplifier (about 15 watts).
spoclogo2.jpg

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

wardy5
  • Locked
  • Question
Additional speaker to paging system
Replies
4
Views
298
curlycord
curlycord
puttwill
  • Locked
  • Question
T7406e(cordless) call drops to one way audio
Replies
5
Views
218
puttwill
puttwill
iPepsi57
  • Locked
  • Question
How to link two MICS together for single phone.
Replies
8
Views
161
Qzwsa
Qzwsa
dellphone
  • Locked
  • Question
6x16 handsfree / speaker issue or question
Replies
5
Views
142
dellphone
dellphone
RLSbutton
  • Locked
  • Question
Wireless Speaker Norstar Paging TOA Amplifier
Replies
0
Views
74
RLSbutton
RLSbutton

Part and Inventory Search

Sponsor

Back
Top