Two tunnels between Contivity boxes

[AyrishGrl]

Is it possible to have two separate tunnels between two Contivity boxes? I have a point to point T1 connection to one of our remote offices. I would like to put a contivity at the remote site on the other end of the T1. However, the site requires a separate lab network. Traffic on this network should be kept seperate from regular BOT traffic. I was thinking of doing this. Plug Adtran CSU into serial interface on contivity to complete the point to point connection. The other end of the T1 comes into our main office and resides on a serial interface on our Cisco border router. Behind our Cisco sits our main Branch office 2700. I was thinking of having two tunnels from the remote site (1100); one for lab traffic which would go to the 2700 and then straight out to the internet and thats it and the other for normal access to our headquarters. The 1100 has a serial interface and two ethernet. One ethernet for the lab and one for local lan. I also need to be able to restric the lab traffic so it has no access to any of our internal network. Is this possible to do?