Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Two BCM's joined by IP and only one connected to the PSTN
- Thread starter bekcom
- Start date
Lol, you just need to make sure the proper routes/dest codes are in place. Make sure the 9 is passed to the system with the PSTN.
-----------------------------------
Telephone & computer wiring/Cat 5E/Cat 6/Fibre Optic cabling in Calgary, AB
-----------------------------------
Telephone & computer wiring/Cat 5E/Cat 6/Fibre Optic cabling in Calgary, AB
norstarboy125
Vendor
There are a few steps involved to make this work. Look into remote package programming for lines besides dest codes, routes, etc.
Jeremy J. Carter
Charm City Communications
Norstar. BCM. CS1000 Programmer
Jeremy J. Carter
Charm City Communications
Norstar. BCM. CS1000 Programmer
As norstarboy said, you need IP trunking (or something similar) between the two. Private and public networks with remote packages on the main box, IP Trunking licenses (probably a minimum of two) and MCDN license.
Jim
"If I had known it would turn out like this, I would have became a locksmith" Albert Einstein
NCSS NCTS NCTE
Mitel 3300 4.2 basic & advanced, 5000 4.0
Jim
"If I had known it would turn out like this, I would have became a locksmith" Albert Einstein
NCSS NCTS NCTE
Mitel 3300 4.2 basic & advanced, 5000 4.0
- Status
Similar threads
- Locked
- Question
- Locked
- Question