Two ASCII terminal talking with each other through IP NETWORK

[okanyilmaz]

Is it possible to connect two ASCII Terminal such;

Terminal+Router --(IP Network)-- Router+Terminal

Terminals are connnected via ASYNC Serial line.

And if so, how do you configure routers such that; Terminals can talk to each other through a TERMINAL EMULATION Program such as HYPERTERMINAL.

 

[Blacknight1964]

Yes it can be done, just did it, after surfing the Cisco Web site for the last 4 days!!

This is the only web page on the Cisco Site.

http://www.cisco.com/warp/public/700/14.shtml

or search for "How to Tunnel Async Data"

It assumes that you know a lot about configuring Cisco Routers, as you have to fill in the blanks in some cases.

Cheers.

Glen

 

[jeter]

thats a great page for what you need. if you need a working config with async ports let me know and I will post
asap. I do it now but I left my disk at work. Jeter@LasVegas.com
J.Fisher CCNA

 

[okanyilmaz]

thanks blacknight for the url

jeter,i will be very happy if u send me the info.

okanyilmaz@hc.aselsan.com.tr