Two active routes ?

[sikek]

Hi i have two active routes in OSPF area 0 with the same equal cost. how can i make it select the 2nd router over the 1st ?
do i have to adjust the cost on both sides ?


show ip route 10.10.23.1
Routing entry for 10.10.23.0/24
Known via "ospf 1", distance 110, metric 2, type intra area
Last update from 10.10.24.2 on Vlan224, 00:28:28 ago
Routing Descriptor Blocks:
* 10.10.24.2, from 10.254.1.250, 00:28:28 ago, via Vlan224
Route metric is 2, traffic share count is 1
10.1.1.4, from 10.254.1.250, 00:28:28 ago, via Vlan105
Route metric is 2, traffic share count is 1

 

[unclerico]

you should do it on both sides so no asymetric routing happens.

I hate all Uppercase... I don't want my groups to seem angry at me all the time! =)
- ColdFlame (vbscript forum)

 

[baddos]

You can adjust the ospf cost on the interface you are learning the route from.