I have a 406 processor on 3.2.54 software, and someone at this company has come in and messed with Manager and now all calls that have twinning get a carrier message saying "you do not have to dial a 1 or the area code for this call" and there is no area code or 1 when I look at the number in the twinning tab, there is a 9 as well. Of course they can make outgoing calls just fine as well as forward calls. I cannot find what they did that changed this
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Twinning
- Thread starter Bibbyboy
- Start date
Goto that pc and search for a .bak file
You can find it here:
C:/ program files/avaya/ip office/manager
Search for the right time and date
You can open this file with manager in offline mode
If you have this file open then send this config
To open and send it go to: file -offline
ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
You can find it here:
C:/ program files/avaya/ip office/manager
Search for the right time and date
You can open this file with manager in offline mode
If you have this file open then send this config
To open and send it go to: file -offline
ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
- Status
Similar threads
- Locked
- Question