Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Twinning to gsm

Status
Not open for further replies.

flexphil

Programmer
Feb 3, 2007
29
0
0
BE
I use the twinning with the license to go to a gsm. Belgium

I've removed the line coverage c= and I've programmed the line b= only for outgoing calls. The problem with twinning is, that the second line is still coming in.

Is there a possibility too give a busy tone for the second line?

IpOffice 3.2 and vmpro

Thx
 
Hi,

I think the Technical Tip 146 answer to tour question

In some cases it is desirable to reserve the last Call Appearance (CA) key on a user for outgoing calls only. For example, operators on busy systems may wish to reserve an appearance to ensure they can always transfer a call no matter how busy the incoming call traffic is. In other cases, on systems without Voicemail, it may be desirable to enable traditional busy behaviour on phones by reducing the number of CA keys to two and reserving the last key for outgoing calls only.

From 3.1(65) onwards CA key reservation can be activated by adding the following source number string to each user requiring this functionality:

RESERVE_LAST_CA=

This string has to be configured on each user individually, it cannot be configured globally.

Any user that has RESERVE_LAST_CA= in its source number list will not accept an incoming call on its last CA. The caller will get Busy or be sent to Voicemail as appropriate.

 
I've programmed it like you've described.
Still I have the same problem with the twinned phone's.

They don't receive busy tone.

Thx
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top