Twinning Phones

[allworxguy]

BCM 450 Not sure what release. I'm not well versed on the 450.

Is there a way to twin a digital set and an analog one. I know how to do this using using ANS DN or HG and adding the 2nd DN to the mailbox, but is there an actual twinning process in the 450?

Marv ccna

http://www.telemarv.ca

Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990

 

[allworxguy]

Ok to answer my own question.

After being on site today, the answer is no.

Solution is the same as Norstar.

Give digital/IP phone a new DN
Install analog phone and change it's DN to the IP/digital phone old DN.
Add Ans DN to the digital/IP phone of the analog phone
Add digital/IP new DN as a secondary DN to the mailbox

Phones are now twinned. Both phones ring on original DN# and both phones have access to original mailbox.


Marv ccna

http://www.telemarv.ca

Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990