Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Twinned “Mobile Call Control” 1
- Thread starter dsm600rr
- Start date
-
1
- #2
kwing112000
Vendor
dial ** to get system dialtone, Dial the extension and hang up.
Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Vive Communications
Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Vive Communications
- Thread starter
- #3
kwing112000 is correct, after you dial ** to get system dialtone you can also dial 9 and an external number.
*52 will clear a call. It may be necessary to clear a connected call, for example after attempting a transfer and hearing voicemail or ringing. To do this dial ** for dial tone and then *52.
## will return to dial tone after getting busy, number unobtainable or short code confirmation tones from the IP Office.
*52 will clear a call. It may be necessary to clear a connected call, for example after attempting a transfer and hearing voicemail or ringing. To do this dial ** for dial tone and then *52.
## will return to dial tone after getting busy, number unobtainable or short code confirmation tones from the IP Office.
- Status
Similar threads
