TWEAKING 0 RINGS TO NIGHT SERVCE

[jjimm]

Using Call Pilot 150 w MICS is working fine, except for a brief half ring on the attendant phone when night service is on.
The lines all roll to voicemail when night service is off, after 4 rings.
DRT=4 Xfer dealy=4. Answer rings=4 in Call Pilot

When night service is on, the caller hears no ring-=it goes directly to the night greeting. However, there is that brief partial ring on the attendant phone.

Any ideas what might be causing this?

 

[luv2ski]

for nite service to work must ring first.. does same on copper,t1,pri...

ONLY 17 WEEKS TILL SKI SEASON STARTS

 

[mroberts]

Ringing service just adds whatever is in it to what already rings.
So, if you put the first port of the vmail in it, it doesn't prevent the main phone from ringing since it does already. It just adds the vmail to it. Since, you are calling the vmail it picks up immediately but it needs a brief half ring cycle before it 'sees' the call and picks up.

MRoberts

http://www.a1teletronics.com

 

[jjimm]

Ahh! I can rest easier, now. Thank you both!