TV signal

[phonman123]

I have a application where I need to put the local TV provider signal over a LAN network to about 44 TV's. All TV's have a Cat 5e cable with S-video input. This is another job designed by an architect.

 

[jimbopalmer]

1) I see no ethernet in any solution I can think of

2) this web site can show you how to use Cat 5 wire at huge cost to replace coax or s-video

http://www.s-video.com/avhub1.html

I tried to remain child-like, all I acheived was childish.

 

[AvayaNovice]

Yeah... to have the same capacity as any decent cable system (20-500 or 750 mhz) you'll have to use some pricey gear to get twisted pair cabling to deliver.

We're talking thousands in comparison to recabling.

Nick

 

[bierhunter]

Well, you could use a Cisco IPTV solution; but that's not really a topic for this ethernet forum.

We used to multicast satellite tv all over the network with that.

But if you're interested,

http://www.cisco.com.

BierHunter
CNE, MCSE, CCNP

 

[bcastner]

http://www.nitek.net/