Abraham Sheehan
Technical User
In the old Avaya definity you could TTI out a set or export it in the system. Is there a method or a way to do this in the Avaya IP office. The system is an IP500V2 11.0.4.1.0 build 11
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Turning off a phone
- Thread starter Abraham Sheehan
- Start date
- Status
You can log off the user by dialing *36 but it is not the same as the TTI feature on Definity.
It will simply log off the user and the NoUser will show preventing anyone from making outgoing calls on the phone set.
After a reboot of the system the user may come back though and to make sure that the phone stays unusable you would have to renumber the extension in the system programming.
But
if you already go into the system programming you might as well simply delete the user and have the same result.
With R9.0 or higher you can also use web manager to delete the user then you don't have to have Manager on your PC/laptop
Joe
FHandw, ACSS (SME)
Remembering intrigrant 2019
It will simply log off the user and the NoUser will show preventing anyone from making outgoing calls on the phone set.
After a reboot of the system the user may come back though and to make sure that the phone stays unusable you would have to renumber the extension in the system programming.
But
if you already go into the system programming you might as well simply delete the user and have the same result.
With R9.0 or higher you can also use web manager to delete the user then you don't have to have Manager on your PC/laptop
Joe
FHandw, ACSS (SME)
Remembering intrigrant 2019
- Status