Turn on Digital Ports

[RichmondBailey]

There is a feature that goes out an tests digital ports and then turns them off if a digital phone is not found. Is there a command to turn ALL the ports back on? Is there a command to turn the feature off?

Please provide detailed instructions for the commands as I am not a Nortel tech.

Thanks for the help!

 

[bigindian65]

it is not recommended

you would take ld 30 out of your midn routines ovly data block in ld 17 under DROL

Mato' Was'aka

 

[bigindian65]

also, if you want them all idle just enable your shelves

I E, superloop 4

ld 32
.enls 4 0

will enable all the cards in IPE shelf for loop 4

Mato' Was'aka

 

[acewarlock]

Quote:
Please provide detailed instructions for the commands as I am not a Nortel tech.


For detailed support you need to give more info, like
Systam Type
Rls of SW




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.