TTY phone MICS Nortel system

[kjk165]

I have a customer who needs a TTY device for their Nortel MICS phone system. They are using the 7310, 7316 model phones. I know I can get a TTY device and plug it into a analog port but the issue is all their analog ports are taken. Also they want this person to be able to answer their main line and rollover lines. I looked at the Ameriphone Q90 but didn't know if that would work with the 7310's or the 7316's being that they are digital phones. Any suggestions would be very helpful.

Thanks

Karl

Avaya SME ACIS Certified

 

[exsmogger]

Use an ATA to convert a digital station to analog.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952

 

[curlycord]

If out of digital as well you can use the Konexx DWI Dual device to allow data and voice at the same time:

http://www.konexx.com/office.htm

=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[exsmogger]

Is that the same or similar to the Linx ATA that was sold at one time?

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952

 

[curlycord]

I think so but the single version.

=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca