TSW SP3 Tieline

[caller]

Hello together,
we have a customer with a tieline to a linux pc. Now my problem is, that the customer must send the complete number to the other side.On the basis of this, the customer comes into the other system and can working. Befor we have done the service pack update, it was running. The parameter of the route are the same. Can somebody help me?

ROU SEL TRM SERV NODG DIST DISL TRAF
51 1120000100000010 4 2110000000 0 30 128 00151515
SIG BCAP
211111000031 111111

ROU TYPE VARC VARI VARO FILTER
51 SL60 H'00000310 H'00000000 H'063000E0 NO

 

[whosrdaddy]

set last digit of SIG to 0, but may only be set for TIE lines to other MD110 or VPN via public.

so SIG = 211111000030

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[caller]

Thanks for your answer. I have change the sig parameter but no changes. The number is not send.

 

[IPuser]

Hello caller,
You sure it isn't sending number, or is Linux PC just not recognising it anymore ? Improvements between releases sometmes make subtle changes in number types &/or formats. This often cause problems for novel applications that haven't been rigorously verified to a standard.
You need signal trace in Linux PC, to be sure number isn't arriving, before changing lots of thgings on MD110 configuration that was working before.

Cheers,

Larry